CISCO CCNA CCNP CCIE Collaboration Voice LAB KIT

$175.00

CISCO CCNA CCNP CCIE Collaboration Voice LAB KIT

Description

CISCO CCNA CCNP CCIE Collaboration LAB KIT

· The best Cisco collaboration lab kit that covers Cisco Call Manager Express CUCME all topics.

· Practice on both SIP and SCCP phone.

· Pre-configured Call manager Express setup both CLI and GUI.

· Installed a PVDM for conference and transcoder

· Plug and run.

· Included CME

Lab KIT Includes

· 1 x Cisco 2951 / 2821 Router version (C2800NM-ADVENTERPRISEK9-M), Version 15.1

· 256 MB RAM 128 MB flash card

· 1 x PVDM2 – 16

· 1 x Cisco 3750-24 Switch POE

· 1 x Cisco 7961 SCCP phone

· 1 x Cisco 7960 SIP phone

· Console Cable

· 2 x Power Cords

· 3 x Straight Cables

· 1 x Serial to USB converter

Switch#sh env all

FAN is OK

SYSTEM TEMPERATURE is OK

System Temperature Value: 35 Degree Celsius

System Temperature State: GREEN

Yellow Threshold : 66 Degree Celsius

Red Threshold : 76 Degree Celsius

SW PID Serial# Status Sys Pwr PoE Pwr Watts

— —————— ———- ————— ——- ——- —–

1 Built-in Good

SW Status RPS Name RPS Serial# RPS Port#

— ————- —————- ———– ———

Switch#sh post

Stored system POST messages:

Switch 1

———

POST: CPU MIC register Tests : Begin

POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin

POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin

POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin

POST: PortASIC RingLoopback Tests : End, Status Passed

POST: Inline Power Controller Tests : Begin

POST: Inline Power Controller Tests : End, Status Passed

POST: PortASIC CAM Subsystem Tests : Begin

POST: PortASIC CAM Subsystem Tests : End, Status Passed

POST: PortASIC Stack Port Loopback Tests : Begin

POST: PortASIC Stack Port Loopback Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin

POST: PortASIC Port Loopback Tests : End, Status Passed

ROUTER….

CME#sh ver

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(3)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Wed 10-Aug-11 05:17 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

CME uptime is 2 hours, 36 minutes

System returned to ROM by power-on

System image file is “flash:c2800nm-adventerprisek9-mz.151-3.T2.bin”

Last reload type: Normal Reload

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

Cisco 2851 (revision 53.51) with 509952K/14336K bytes of memory.

Processor board ID FTX1113A34Q

2 Gigabit Ethernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

250880K bytes of ATA CompactFlash (Read/Write)

License Info:

License UDI:

————————————————-

Device# PID SN

————————————————-

*0 CISCO2851 FTX1113A34Q

Configuration register is 0x2102

CME#sh inv

NAME: “2851 chassis”, DESCR: “2851 chassis”

PID: CISCO2851 , VID: V03 , SN: FTX1113A34Q

NAME: “PVDMII DSP SIMM with three DSPs on Slot 0 SubSlot 4”, DESCR: “PVDMII DSP SIMM with three DSPs”

PID: PVDM2-16 , VID: V01 , SN: FOC12221GAH

Reviews

There are no reviews yet.

Be the first to review “CISCO CCNA CCNP CCIE Collaboration Voice LAB KIT”

Your email address will not be published. Required fields are marked *